LED flood light installation tips and precautions

- Jul 25, 2018-

Although LED flood lights are easy to install, some installation tips and needs to be noted, this is a supplement to the advantages of LED flood lights. Buying lamps with fixing screws, the installation is relatively simple, elaborate: the materials needed: LED guardrail light clips, transformers with waterproof function, sub-controllers, the steps are as follows:

1, install the guardrail, punch holes in the wall, arduous according to the actual requirements, generally within 3 cm,

2, do anti-static measures, such as the workbench to be grounded, workers wear the corresponding electrostatic clothing, anti-static measures, because different grades of LED flood lights of different quality, anti-static ability is different.

3, installation attention to sealing, poor sealing, diameter affects the service life of LED flood lights

4, LED flood light wiring is preferably no more than 25 cm, the transformer power can be correspondingly longer, otherwise affect the brightness

LED flood light installation precautions

1.try to use the series LED form, because the LED flood light voltage difference is special. The peak current of ordinary LED is maintained at 80 mA, and the reverse voltage is above and below 6V. When designing the circuit, pay attention to the peak voltage and current at this limit.

2. When soldering, use voltage below 25 watts. The soldering iron only controls the SMD LED exposed at high temperature below 300 degrees Celsius. Do not squeeze the epoxy part of it, or wipe it with a sharp hard object, because the LED light fixture is very fragile. Very easy to damage, welding time is 3 seconds. LED flood lights are widely used, so the installation tips and precautions are very important. LED is a new light source. Under the correct installation mode, it can ensure the stable operation of LED flood lights for a long time.