1, energy saving
The biggest advantage of LED is energy saving. The power of ordinary bulbs ranges from 20W-100W, while the power of energy-saving lamps ranges from 5W-65W. Ball bubble using LED as a light source, power only 0.8 W-12W can replace the 15W-100W ordinary bulb and 5W-50W energy saving lamp. It can be seen that the power ratio of LED bulb to ordinary bulbs and energy-saving lamps can reach 1:10.
2. Short response time
-The general energy-saving lamp will change due to changes in ambient temperature. Its normal operating temperature is between 20 and 40 degrees. It takes 5 to 6 minutes to work to reach a stable brightness in winter. All lamps, in a cold environment than warm environment is more difficult to work normally, and the light is dark, or accompanied by Flicker, only as the temperature rises, the brightness will gradually become normal. The temperature is-35°C-80°C, so it is generally not necessary to consider its working environment temperature.
It can directly replace the existing energy-saving lamps and ordinary light bulb products with Tongxiang E27, E14, GU10 and B22 interfaces without making any changes, without the help of any technicians or professionals, reading the instructions for use in detail, DIY can easily be replaced from ordinary lighting to LED lighting.
4, long service life
The life of ordinary bulbs and energy-saving lamps is 1000 hours and 8000 hours; LED bulb light source life is 50000 hours.
Ordinary light bulbs and energy-saving lamps have a certain degree of impact on health due to IR (infrared) and UV (ultraviolet) radiation during operation.
6, environmental protection
Ordinary bulbs and energy-saving lamps will produce a lot of IR (infrared) and UV (ultraviolet) radiation when working. Moreover, the bulb is filled with inert gas, and there are pumps and other harmful gases and substances in the production process and after the use of waste. It will also have a certain impact on the environment when it is damaged.
The bulb uses LED as the light source, and the LED works without IR (infrared) and UV (ultraviolet) radiation. Moreover, the LED light source used does not have any filling gas, and there is no comminuted damage, which will not cause adverse effects on the environment. This reflects its environmentally friendly side.
The temperature of ordinary energy-saving lamps will be around 60-80°C when working, and the temperature of ordinary incandescent lamps will be higher (80-120°C). If you accidentally touch them, you will burn them. The bulb lamp uses LED as the light source, with a professional heat dissipation structure, the temperature is very low (40-60°C), and it will not burn on the hand.
The bulb uses a professionally designed exterior, the lamp shell material uses PC material/acrylic die-casting molding, and the light source part uses special materials for earthquake resistance and drop resistance, the lampshade is acrylic material, even if it is broken, it is not easy to cause cuts.