A19 led bulb high CRI 12w 15w 18w 3000k 4000k 5000k 6000k
The emergence of LEDs breaks the design method and idea of traditional light sources. LED bulbs are light-emitting diodes, which are solid-state semiconductor devices capable of converting electrical energy into visible light, which can directly convert electricity into light.This series of products are widely used in lathes, machine tool work lights, solar light sources, cold storage, basement, industrial and mining, bathroom, emergency lighting, building renovation and other places lighting.
The inherent characteristics of the LED bulb determine its many advantages, such as:
High brightness, low heat: LED uses cold light technology, and the heat generation is much lower than ordinary lighting fixtures;
Low power consumption: LED power consumption is quite low, DC drive, ultra-low power consumption (single tube 0.03-0.06 watts), electro-optical power conversion is close to 30%. In general, the operating voltage of the LED is 2-3.6V, and the working current is 0.02-0.03A; that is to say, it consumes no more than 0.1W of electric energy, and the same lighting effect is nearly 80% more energy-efficient than conventional light sources;
Long service life: Some people call the LED light source a long life light. It is a solid cold light source, epoxy resin package, and there is no loose part in the lamp body. There are no shortcomings such as filament light-emitting, heat deposition, light decay, etc. Under the proper current and voltage, the service life can reach 60,000 to 10 Ten thousand hours, more than 10 times longer than traditional light sources;
Small size: LED is basically a small chip that is encapsulated in epoxy resin, so it is very small and very light;
Environmental protection: LEDs are made of non-toxic materials, unlike mercury-containing fluorescent lamps that can cause pollution, and LEDs can be recycled. There is no ultraviolet or infrared light in the spectrum, no heat, no radiation, small glare, cold light source, safe touch, and is a typical green illumination source;
Rugged: LEDs are completely encapsulated in epoxy and are stronger than bulbs and fluorescent tubes. There is no loose part in the lamp body, which makes the LED not easy to damage.
PRODUCT DETAILS:
LED A60 Bulb 3w
POWER: | 3W |
LED TYPE: | San an |
CCT: | 3000k,6500k |
CRI: | >80 |
LED DRIVER: | AC85-265V |
MATERIALS: | Aluminum Plastic |
BASE: | E27 |
LIFT SPAN: | 50000HOURS |
WORKING TEMP: | -20 to 50°C |
JUNCTION TEMP: | 60°C |
STORAGE TEMP: | -20°C~+80°C |
SIZE: | Φ45*90mm |
LUMINOUS FLUX: | 240LM |
LED A60 Bulb 5w
POWER: | 5W |
LED TYPE: | San an |
CCT: | 3000k, 6500k |
CRI: | >80 |
LED DRIVER: | AC85-265V |
MATERIALS: | GLASS |
BASE: | E27 |
LIFT SPAN: | 50000HOURS |
WORKING TEMP: | -20 to 50°C |
JUNCTION TEMP: | 60°C |
STORAGE TEMP: | -20°C~+80°C |
SIZE: | Φ60*110mm |
LUMINOUS FLUX: | 400LM |
LED A60 Bulb 7w
POWER: | 7W |
LED TYPE: | San an |
CCT: | 3000k 6500k |
CRI: | >80 |
LED DRIVER: | AC85-265V |
MATERIALS: | GLASS |
BASE: | E27,B22 |
LIFT SPAN: | 50000HOURS |
WORKING TEMP: | -20 to 50°C |
JUNCTION TEMP: | 60°C |
STORAGE TEMP: | -20°C~+80°C |
SIZE: | Φ60*110mm |
LUMINOUS FLUX: | 560LM |
LED A60 Bulb 9w
POWER: | 9W |
LED TYPE: | San an |
CCT: | 3000k,4000k,6500k |
CRI: | >80 |
LED DRIVER: | AC85-265V |
MATERIALS: | GLASS |
BASE: | E27,B22 |
LIFT SPAN: | 50000HOURS |
WORKING TEMP: | -20 to 50°C |
JUNCTION TEMP: | 60°C |
STORAGE TEMP: | -20°C~+80°C |
SIZE: | Φ60*110mm |
LUMINOUS FLUX: | 720LM |
LED A60 Bulb 12w
POWER: | 12W |
LED TYPE: | San an |
CCT: | 3000k 6500k |
CRI: | >80 |
LED DRIVER: | AC85-265V |
MATERIALS: | GLASS |
BASE: | E27,B22 |
LIFT SPAN: | 50000HOURS |
WORKING TEMP: | -20 to 50°C |
JUNCTION TEMP: | 60°C |
STORAGE TEMP: | -20°C~+80°C |
SIZE: | Φ60*110mm |
LUMINOUS FLUX: | 960LM |
LED A60 Bulb 15w
POWER: | 15W |
LED TYPE: | San an |
CCT: | 3000k, 6500k |
CRI: | >80 |
LED DRIVER: | AC85-265V |
MATERIALS: | GLASS |
BASE: | E27,B22 |
LIFT SPAN: | 50000HOURS |
WORKING TEMP: | -20 to 50°C |
JUNCTION TEMP: | 60°C |
STORAGE TEMP: | -20°C~+80°C |
SIZE: | Φ70*130mm |
LUMINOUS FLUX: | 1280LM |
MORE PRODUCTS DETAILS:
1) Diffusing Cap
2) Aluminum& PC Heat Sink.
3) High Brightness Led Chips 2835.
4) Standard Nickel plated Copper Edison base.
FACTORY SHOWS: