400w metal halide bulbs ED118 Clear and white coated Oval
Oval 400w metal halide lamp lamp ED118 and white coated oval metal halide lamps have high luminous efficiency, low light decay and good light color consistency.The bubble shell has strong ability to bear external force, the elliptical shape of the glass bubble shell diverges light properly to make light better, the coating on the inner wall of the bubble shell can improve the softness of lighting light and make the vision of human eyes more comfortable, this series of metal halide bulb is more suitable for lighting in large space.
White coating oval metal halide light source description:
Features: with the advantages of other metal halide lamps, it can meet the needs of various lighting and soft light.
Application: Factory lighting, warehouse lighting, public places lighting, small and medium-sized stadium lighting and billboards, buildings, scenery floodlight, etc.
Excellent optical pass maintenance rate and long life, ensuring high optical pass maintenance rate and low maintenance cost;
Good color rendering can create a high visual comfort environment;
Good color stability, long service life, good consistency and uniformity;
Mercury vapor lamp, sodium vapor lamp electrical system compatibility is good, can easily replace mercury vapor lamp and sodium vapor lamp, easy to use, and can reduce the initial investment cost;
Choose the right color temperature to create different lighting effects。
400W ED118 Clear American Standard probe start METAL HALIDE LAMPS
400W ED118 Clear OSRAM Standard Metal Halide Lamps
400W ED118 White Coated Soft light Metal Halide Lamps
1. During the lighting process, a single bulb cannot be used. It must be properly installed with a dedicated ballast and trigger that is equipped with the same power to illuminate;
2. After the light bulb is turned off, it takes 15 minutes to wait for the bulb temperature to drop before the power can be turned on to start the illumination again. The light bulb is too hot to start and is easily damaged.
3. Be careful not to cut off the power immediately after starting the lighting. Turn off the light after 2-3 minutes of lighting. This operation will help extend the lighting life of the lamp and reduce the maintenance cost of the lighting project.